LS 215e
1. HDMI ARC operation.
The Soundbar has built-in the HDMI V1.4 ARC function. If your TV can support HDMI V1.4
ARC as well, then you can entertain the music base on ARC connection.
Step1. Using a HDMI cable connects the HDMI out jack on the rear panel of subwoofer to
the HDMI IN jack on the TV. (Normally, there will have ” ARC” silkscreen printing next to the
jack if your TV support such function.)
Step2. Please check if your TV is setting the ARC function on the “ON” position. (Some TVs
need set up the ARC function first, details please reference the instruction manual of your
TV).
Step3. Press the HDMI 1 or HDMI 2 key on the remote controller, or press the MODE
button enters to HDMI mode for playing.
Step4. The Soundbar can detect and play the ARC function automatically. Please make
sure there is audio playing on your TV. Then you can enjoy the music.
2. HDMI CEC control operation.
Before you using the CEC function with Soundbar please check if the DVD and TV have
HDMI version 1.4 CEC function as well. The CEC function can achieve with other CEC
function ready device only.
Step1. Using a HDMI cable connects the HDMI OUT jack on the rear panel of subwoofer to
the HDMI IN jack on the TV; Using another HDMI cable connect the HDMI IN jack on the
rear panel of subwoofer the HDMI OUT jack of DVD play side.
Step2. To enter the HDMI model, please press the HDMI 1 or HDMI 2 button on the remote
controller or the mode key on the front panel of subwoofer. Then the CEC function will
work automatically.
The CEC control can achieve below functions:
a. Volume control.
You can adjust and control the volume of Soundbar using by any remote controller of
Soundbar, DVD or TV.
b. Mute function.
You can achieve the mute function or resume the sound when you just press the MUTE
button on Soundbar, DVD or TV's remote controller.
3. HDMI 1&2 operation.
Using a HDMI cable connect the HDMI input jack on the rear panel of subwoofer to the
HDMI output jack of your other audio device. Press the HDMI 1 or HDMI 2 key on the
remote controller enter to the HDMI play mode, then you can enjoy the music
entertainment.
4. COAXIAL 1&2 operation.
Using a coaxial cable connect the coaxial input jack on the rear panel of subwoofer to the
coaxial output jack of your other audio device. Press the COAX 1 or COAX 2 key on the
remote controller enter to the coaxial play mode, and then you can enjoy the music
entertainment.
HDMI & Audio Operation
54
To Next Page
Loading...
