MBS0709E, MBS12E
www.blaupunkt.com
11
7. FAN SPEED Key: In cooling, heating and fan mode, press this key to select high,
middle, low speed. This function is not available in SLEEP mode and DEHUMID-
IFYING mode.
8. TIMER Key: In the case of power on, press the key to close timing; in the case
of power o, press the key to open timing. Press the key, when the timing sym-
bol ashes, press up and down key to select the required timing value. Timing
values can be set in 1-24 hours and the timing value is adjusted up or down by
one hour.
9. SWING Key: The SWING function only can work after turn on the unit, but you
can turn on or o.
10. Wi- Key: Press this key to turn on or o Wi-.
2. Operation instructions of remote control
1) The remote control Panel is as follows: Instructions of key opera-
tion of the high-quality remote control are as follows:
1. Power: Press the key to turn on or turn o the machine.
2. Mode: press the key to switch between cooling, dehumi-
dication, fan and heating (single cold without such function)
mode.
3. Up: press the key to increase temperature and timing set
value.
4. Down: press the key to reduce temperature and timing set
value.
5. Fan: press the key to select high, medium and low wind
speed output circularly.
6. Timer: press the key to set timing value. Timing value can
be set with 1-24 hours and the timing value is adjusted up-
wards or downwards by one hour.
7. Swing: Press the louver will swing up and down.
8. Press the key to switch between Celsius and Fahrenheit.
9. Sleep Mode: Press the key to turn on the sleep mode.
绘图
校对
审核
核准
东莞市金鸿盛电器有限公司
机型:
客户:
图号:
制单号:
日期: 年 月 日
CMYK 100/0/0/0
CMYK 0/0/0/100