Blaupunkt Moby Blue S 0709E - Drainage Instructions; Manual Drainage Procedure

MBS0709E, MBS12E
www.blaupunkt.com
15
3) Elongate the exhaust pipe and snap the at end of the exhaust pipe joints into the hole of
the window sealing plate assembly (as shown in Fig.5 and Fig.6) .
Notes:
1) The at end of the exhaust pipe joints must be snapped into place.
2) The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep the ven-
tilation of the exhaust pipe not blocked.
Important Notice:
The length of the exhaust hose shall be 280~1,500mm, and this length is based on the speci-
cations of the air conditioning. Do not use extension tubes or replace it with other dierent
hoses, or this may cause a malfunction. Exhaust host must be not blocked; otherwise it may
cause overheating.
VI Drainage Instructions
This machine has two drainage methods: manual drainage and continuous drainage.
1. Manual drainage:
1) When the machine stops after the water is full, turn o the machine power and unplug the
power plug.
Notes:
Please move the machine carefully, so as not to spill the water in the water pan at the bottom
of the body.
2) Place the water container below the side water outlet behind the body.
3) Unscrew the drainage cover and unplug the water plug, the water will automatically ow
into the water container.
Figure 5 Figure 6