22
Fast winding
Fast forward
• Press FF (fast forward).
When the end of the tape is reached,
the mechanism will reverse the tape
and start playing the other side.
Stop fast forward
• Press FR
Fast rewind
• Press FR (fast rewind).
When the beginning of the tape is reached,
the mechanism will start playback.
Stop fast rewind
• Press FF.
Fast winding
FR: Fast rewind; press FF to stop
FF: Fast forward; press FR to stop
Reversing the tape
Press both buttons at a time.
“TR 1” or “TR 2” will appear in the display.
Tape operation
The car radio has to be switched on.
The unit will automatically switch to tape
operation when a tape is inserted.
Inserting a tape
• Turn on the set.
• Insert a tape.
Side A or 1 will be played.
During tape operation, “TR 1” or “TR 2”
(track) will be indicated on the display pan-
el.
Insert the tape with side A or 1 facing up, the
open side showing to the right.
Removing a tape
• Press .
The cassette will be ejected.
Adjusting the volume for traffic
messages
This volume was preset at the factory,
though you can alter the value.
To alter the volume of traffic messages:
• In radio or cassette mode, press the
+ / - button and adjust the volume you
wish to have for traffic messages.
• Press TA/AF for about 3 seconds until
“TA VOL” appears briefly in the dis-
play.
Traffic messages will be played at a higher
volume than the normal audio playback, if
the priority for traffic messages has been
activated before.
If the volume level is altered while a mes-
sage is played, this will only affect the cur-
rent announcement.
BA Monte/SaoP RCR gb 04.01.2001, 15:28 Uhr22
To Next Page
Loading...
Need help?
General
