EasyManua.ls Logo

Blaupunkt Montevideo 4010 DVD - User Manual

Blaupunkt Montevideo 4010 DVD
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Montevideo 4010 DVD 1 011 103 400
Operating and installation instructions
Mode d’emploi et de montage
Instrucciones de manejo e instalación
Instruções de serviço e de montagem
Car Radio
|
DVD
|
CD
|
USB
|
SDHC
|
VCD
|
MP3
|
WMA
www.blaupunkt.com
01_Montevideo4010DVD_gb.indd 1 21.03.11 10:37

Questions and Answers

  • C
    Christopher MullenAug 13, 2025
    Why is there no power or sound in my Blaupunkt Montevideo 4010 DVD?
    • K
      Kathleen BlackwellAug 13, 2025
      If your Blaupunkt Car Receiver has no power or sound, first, ensure your car ignition is turned to ACC or ON. Then, check the cable connections and replace the fuse if it's blown. Also, verify that the volume isn't at its minimum or the mute function is off. If the above solutions cannot help, press the RESET button.
  • S
    Seth BarnettAug 17, 2025
    What to do if Blaupunkt Car Receiver sound skips due to vibration?
    • W
      walter80Aug 17, 2025
      If the sound skips due to vibration in your Blaupunkt Car Receiver, adjust the mounting angle to be less than 30°. Also, ensure the unit is securely mounted with the appropriate mounting parts.
  • R
    rodneyalvaradoAug 20, 2025
    Why are my preset stations lost on my Blaupunkt Car Receiver?
    • M
      Mrs. Erica Jackson MDAug 20, 2025
      If your Blaupunkt Car Receiver's preset stations are lost, it might be due to an incorrectly connected battery cable. Ensure the battery cable is connected to the terminal that is always live.
  • R
    Robert FernandezAug 25, 2025
    How to fix Blaupunkt Montevideo 4010 DVD Car Receiver disc sound skips, tone quality is low?
    • A
      Amy MorrisAug 25, 2025
      If your Blaupunkt Car Receiver disc sound skips or the tone quality is low, the CD may be dirty or damaged. Try cleaning the CD or using a different one.
  • T
    Tina ManningAug 28, 2025
    What to do if my Blaupunkt Montevideo 4010 DVD display shows ERROR?
    • W
      whitecharlesAug 28, 2025
      If your Blaupunkt Car Receiver displays ERROR, the disc might be dirty, damaged, or upside down. Press the eject button to remove the disc.
  • J
    Jacob WilliamsAug 31, 2025
    Why is there noise in broadcasts on my Blaupunkt Car Receiver?
    • A
      Anna WatkinsAug 31, 2025
      If there is noise in broadcasts on your Blaupunkt Car Receiver, the station might be too far away, or the signals are too weak. Select other stations with a higher signal level.
  • B
    Brittney SmithSep 4, 2025
    What to do if there is no sound with a disc in my Blaupunkt Car Receiver?
    • K
      Karen FlynnSep 4, 2025
      If a disc is inside your Blaupunkt Car Receiver but there is no sound, make sure the disc is placed in the correct direction with the label side up. If that doesn't work, the disc might be dirty or damaged; try cleaning it or using another disc.
  • M
    Matthew WilliamsSep 8, 2025
    Why is the video file initializing time too long on my Blaupunkt Montevideo 4010 DVD Car Receiver?
    • R
      Rachel WilliamsSep 8, 2025
      If the video file initializing time is too long on your Blaupunkt Car Receiver, it might be due to a file read error or an unsupported file type. Press the SRC button to exit, then press SRC again to play the disc again.

Blaupunkt Montevideo 4010 DVD Specifications

General IconGeneral
Display TypeTFT
Screen Size6.2 inches
Audio Output Power4 x 45 Watts
BluetoothYes
USB PortYes
SD Card SlotYes
EqualizerYes
TouchscreenYes
DVD PlayerYes
NavigationNo
Resolution800 x 480 pixels
RadioFM/AM
Remote ControlYes
Supported FormatsMP3, WMA
Video FormatsAVI, MP4, MPEG

Related product manuals