EasyManua.ls Logo

Blaupunkt Montevideo 4010 DVD - Clock Display; Clock Setting; Auxiliary Input

Blaupunkt Montevideo 4010 DVD
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
- TREB F1-4
Display shows the TREBLE frequency.
F1=10K, F2=12.5K, F3=15K, F4=17.5K.
- BASS Q1-4
Display shows the BASS Q-Factor.
Change the sharpness of the Bass output.
The larger the Q-Factor, the sharper the BASS.
- MID Q1-4
Display shows the MIDDLE Q-Factor.
Change the sharpness of the Mid output.
The larger the Q-Factor, the sharper the MID.
- LOUD F1-3
Display shows the LOUDNESS frequency.
F1=400, F2=800, F3=2.4K.
Mode Button (SRC)
Press the
SRC
button to change between
TUNER (Radio), DISC (when disc is in), USB
(when USB is connected), CARD (when SD/
MMC card is in) or AUX (AUX-IN) play, etc.
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface on the front panel.
2. Press the
SRC
button to select AUX-IN
mode.
- BEEP ON/ OFF Mode
The beep tone feature allows the selection of
an audible beep tone to be heard each time
the menu is accessed.
- 12 /24 HOURS Mode
12 HOURS MODE:
The clock displays in the type of 12 hours such
as 11:18 AM.
24 HOURS MODE:
The clock displays in the type of 24 hours such
as 20:18.
- AREA SET
This option allows you to select the appropriate
frequency spacing for your area.
Rotate the knob to choose USA or Europe.
- STEREO ON/OFF Mode
Selectable when the current source is Radio
mode.
This option allows you to select radio FM
mono/stereo.
General Operation
Clock Display
Press
DISP
once or more to display clock time
for 5 seconds.
Clock Setting
1. Press
DISP
more than 2 seconds, hour
display blinks, then rotate the
VOL/MENU
knob to set hour.
2. Press the
VOL/MENU
knob to confirm, and
minute display blinks, then rotate the
VOL/
MENU knob to set minute.
3. Press
DISP
again to exit.
Menu Setting
Press the
VOL/MENU
knob more than 2 sec-
onds to enter into menu mode, then each
press changes the mode.
- EQ Mode
The Equalizer function applies preset sound
effects to the unit’s audio output signal. Rotate
the knob to select EQ sound effect:
FLAT - CLASSIC - ROCK - POP - JAZZ - OFF
With the equalizer function activated, if bass or
treble is adjusted, the EQ Mode will revert to
"Off". When the equalizer function is activated,
the most recently selected bass/treble levels
cannot be adjusted. When the equalizer func-
tion is not active, the unit will return to the most
recently selected bass and treble levels.
01_Montevideo4010DVD_gb.indd 6 21.03.11 10:37

Related product manuals