20
Specifications
General
Power supply: 12 V DC (11 V - 16 V)
Test voltage 14.4 V, negative ground
Maximum power output: 40 W x 4 channels
Continuous power output: 20 W x 4 channels (4 10 % T.H.D.)
Maximum current consumption: 12 A
Suitable speaker impedance: 4 - 8 ohm
Pre-Amp output voltage: 2.0 V (CD play mode: 1 kHz, 0 dB,
10 k load)
Fuse: 15 A
Dimensions (WxHxD): 178x50x166 mm
Weight: 2.2 kg
AUX-IN level: 300 mV
FM Stereo Radio
Frequency range: 87.5 - 108.0 MHz (Europe)
87.5 - 107.9 MHz (America)
Usable sensitivity: 8 dB
Frequency response: 30 Hz - 15 kHz
Stereo separation: 30 dB (1 kHz)
Image response ratio: 50 dB
IF response ratio: 70 dB
Signal/noise ratio: >55 dB
MW (AM) Radio
Frequency range: 522 - 1620 kHz (Europe)
530 - 1710 kHz (America)
Usable sensitivity (S/N=20dB): 30 dB
Disc Player
System: Disc digital audio system
Frequency response: 20 Hz - 20 kHz
Signal/noise ratio: >80 dB
Total harmonic distortion: Less than 0.20 % (1 kHz)
Channel separation: >60 dB
Video signal format system: NTSC/PAL 60/PAL/AUTO
Video output: 1 ± 0.2 V
Components
Mounting collar 1
Machine screws M5x6 mm 4
Mounting bolt (50 mm) 1
Wire connector 1
Removable face plate case 1
Trim plate 1
Removal key 2
Operating instructions 1
Rubber cushion 1
Remote control unit 1
Battery (CR 2025) 1
Note:
Specifications and the design are subject to change without notice due
to improvements in technology.
To Next Page
Loading...
