Blaupunkt MP 68A - Page 9

SOFTWARE OPERATION
8
12. READ
i. To read setting from DSP (POS1-POS8)
ii. To delete setting from DSP (POS1-POS8)
13. X-OVER AND EQ CHARTS
i. Red lines and slopes will change when HP/LP of
crossover and EQ are modied.
ii. EQ frequency points can be move left/right. For
20Hz - 20kHz can be any regulation.
14. EQ SETTING
Q value = 1-12
6. GAIN
0-40dB is optional range for gain control kf every CH
7. DELAY
i. Auto conguration (base on 1.5 setting)
ii. Manual congurations in selected CH manually
8. LP/SLOPE
9. HP/SLOPE
10. FILTER MODEL
11. WRITE
H