Blaupunkt MUNCHEN CD 53 - Tone and Volume Balance; Adjusting the Bass; Adjusting the Treble; Setting the Volume Distribution

43
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Tone and volume balance
You can adjust the sound settings for
each source separately (radio, CD, CD
changer, AUX and traffic announce-
ment). The volume distribution settings
apply to all the audio sources.
Note:
● You can only adjust the audio set-
tings for traffic announcements
whilst a traffic announcement is ac-
tually being played.
Adjusting the bass
➮ Press the AUDIO = button.
“BASS” appears on the display.
➮ Press the or button : to set
the bass.
➮ Press the AUDIO = button once
you have completed the setting.
Adjusting the treble
➮ Press the AUDIO = button.
“BASS” appears on the display.
➮ Press the button : repeatedly
until “TREBLE” appears on the dis-
play.
➮ Press the or button : to set
the treble.
➮ Press the AUDIO = button once
you have completed the setting.
Setting the volume distribution
left/right (balance)
➮ To set the volume distribution left/
right (balance), press the AUDIO
= button.
“BASS” appears on the display.
➮ Press the button : repeatedly
until “BALANCE” appears on the
display.
➮ Press the or button : to set
the volume distribution left/right.
➮ Press the AUDIO = button once
you have completed the setting.
Setting the volume distribution
front/rear (fader)
➮ To set the volume distribution front/
rear (fader), press the AUDIO =
button.
“BASS” appears on the display.
➮ Press the button : repeatedly
until “FADER” appears on the dis-
play.
➮ Press the or button : to set
the volume distribution front/rear.
➮ Press the AUDIO = button once
you have completed the setting.
TONE AND VOLUME BALANCE