Blaupunkt Munich 100 User Manual

INSTALLATION INSTRUCTION
SAFETY
•
•
•
CAUTION
•
•
•
•
•
•
When installing amplier, rst connect the
device ground connections before connecting
the plugs for the line-out jacks.
Ground connection of external devices may
not be connected to ground of car sound
system (housing).
Assign a mounting location that will not
obstruct driver in any circumstances. Or
cause injuries to drivers and passengers in
case emergency brake or accidents.
Ensure all wires are connected properly, and
that the unit is functioning well before tting
the unit into the mount.
Any unauthorized installation and
modication may cause malfunction to the
unit. Always use the parts that are included
with the units only.
Disconnect the negative terminal of the
battery (Refer to vehicle manufacturer’s
safety instructions).
Be wary to not damage vehicle components
when drilling holes.
Make sure you do not damage vehicle
components when drilling any holes.
The cross sections of the positive and negative
cables must not be less than 1.5 mm2.
Do not connect the vehicle’s plug connectors
to the radio!
Your vehicle may dier from the description
provided here. Blaupunkt is not liable in case
any damage caused by incorrect installation
or connection.
Please contact Blaupunkt dealers or vehicle’s
manufacturer if information provided here
does not t your specic installation
requirement.
Supplied mounting hardware
7

Blaupunkt Munich 100 Specifications

General

Brand	Blaupunkt
Model	Munich 100
Category	Car Receiver
Language	English