127
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
TMCAMPLIFIER
Amplifier
The car sound system provides con-
nections that allow you to connect ex-
ternal amplifiers.
We recommend you use well-matched
products from the Blaupunkt or Veloc-
ity product ranges.
Switching the internal amplifier
on/off
If you are using external amplifiers, you
can switch off the device’s internal am-
plifier (“INT AMP OFF” setting).
Note:
● Please check this setting if the
loudspeakers do not emit any
sound.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “VARIOUS MENU”
appears on the display.
➮ Press the MENU•OK 7, to
display the menu.
➮ Press the or button 6 re-
peatedly until “INT AMP ON” or
“INT AMP OFF” appears on the
display.
➮ Use the buttons 6 to choose
between “INT AMP ON” and
“INT AMP OFF”.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
TMC for dynamic
navigation systems
TMC stands for “Traffic Message Chan-
nel”. Traffic reports are broadcast dig-
itally via TMC, which means they can
be used by compatible navigation sys-
tems during route planning. Your car
sound system has a TMC output, which
you can use for connecting Blaupunkt
navigation systems. You can find out
from your Blaupunkt dealer which nav-
igation systems can be used with your
car sound system.
If a navigation system is connected and
a TMC sender is being received, the
display shows TMC.
If dynamic navigation is active, the sys-
tem will tune into a TMC station auto-
matically.
02NashvilleDAB35_gb 15.11.2005, 14:12 Uhr127
To Next Page
Loading...
Need help?
General
