[11]
ON SCREEN – MOBILE PHONE LINKING OPERATION
At MAIN MENU, touch to shift to mirror link mode
For IOS devices (supported iPhone 5 to iPhone 13), mobile phone linking operation will start
automatically without any setting. Mirror linking appeared on screen.
For Android devices, when the phone is connected at the first time, below photo appeared on
screen.
Click Mirror icon of android, and then scan the QR code by using the connected android phone.
Mirror linking will be appeared on screen and mobile phone operation can be started and controlled by
touching screen of the unit.
Important notice on mobile phone linking operation.
1. Support mirror link: IOS phone is supported from iPhone 5 to iPhone13 and Android phones
from 5.0 version to upper.
2. USB cable should be used to connect the phone to the front USB slot of the head unit.
3. Depends on the connected smart phone, operation & setting may be varied.
To Next Page
Loading...
