RST Press with a pointed object (such as a ball point) to reset the unit
to its initial setting by the factory (default stage).
IR Remote control sensor for signal reception from remote handset.
USB Insert USB device to this slot for digital files playback.
MIC Fo rvoice reception under Bluetooth operation.
TFT SCREEN It shows the status of operation on the unit. This screen is also
a touch display – soft touch the screen for different operations of
unit (refer to other parts of this manual for operation details).
Note
Printings and symbols on the above may be varied from the exact main unit. Referred
to the main
unit for exact functions and features that applied. User is highly recommended to use
the touch
screen control to operate.
MAIN UNIT OPERATION
power turn on or off & adjust sound output level
Bluetooth Mode
During unit operation, press to shift to Bluetooth mode for operation.
Press to pick up an incoming call; dial out after input a phone number; redial
last dial out number.
AUX
Insert an external device to this jack in order to have sound output of that
external device through the unit.
[3]
To Next Page
Loading...
