33
ENGLISH
Navigation
(only for devices with navigation)
Loading navigation data
The navigation software and map data are located on a
microSD card. For devices with navigation, the device is
delivered with the microSD card in the microSD card slot.
To be able to use the navigation, the microSD card must
be inserted in the card slot.
쏅 Open the MAP cover of the card slot
8
.
쏅 Insert the microSD card with the printed side up into
the slot until it engages.
쏅 Close the cover of the slot.
Download of map data
To ensure that you have the latest version of the map data
when you purchase the device, you have 30 days from
the rst GPS positioning to download the latest version
of the map data once and free of charge to the standard
microSD card from the Internet at www.naviextras.com.
You can always purchase map material from this site at
a later time.
Important note:
If the microSD card is lost or damaged, the naviga-
tion map license associated with the card will be lost.
In this case, the license must be purchased anew with
a new microSD card.
Starting the navigation
쏅 Press the NAVI button
3
.
- or -
쏅 Press the SRC button
4
repeatedly until the
Navigation source is selected.
- or -
쏅 In the main menu, press the Navigation button.
The navigation menu is displayed. If you start the
navigation for the rst time, the setup wizard is dis-
played.
Initial startup
If you start the navigation for the rst time, a setup wizard
appears which performs the basic settings for the naviga-
tion.
쏅 Adjust the language for the navigation. This can be
a di erent language from the other functions of the
device.
쏅 Con rm the selection with
.
The end-user license agreement is displayed.
쏅 Read the end-user license agreement. If you agree
with the terms and conditions, press
.
The con guration wizard starts.
쏅 Press
to continue.
쏅 Select a voice for the voice output of the navigation.
Various voices are available for the languages.
쏅 Con rm the selection with
.
쏅 Specify the time format and the units for the naviga-
tion. Next, press
.
On the next screen, you can perform your preferred
route settings.
쏅 If necessary, change the entries by pressing the dis-
played menu entries.
쏅 Press
, after you adjusted the settings.
쏅 Touch
, to nish the con guration.
The navigation menu is displayed.
Entering a destination
Destinations can be entered in di erent ways: Via the ad-
dress or as point of interest from the database of points
of interest. Points of interest can be sights, museums, sta-
diums, petrol stations.
Address
쏅 Open the navigation menu.
쏅 Press on Destination.
The menu for the destination entry is displayed.
Navigation
To Next Page
Loading...
