8
Radio mode
Changing to radio mode or selecting
a memory bank
The following memory banks are available in the
di erent reception areas:
Region Memory banks
EUROPE FM1, FM2, FMT, MW, LW
USA FM1, FM2, FMT, AM, AMT
SOUTH AMERICA FM1, FM2, FMT, AM, AMT
THAILAND FM1, FM2, FMT, AM, AMT
쏅 Press the SRCbutton
@
repeatedly until the
desired memory bank is displayed.
Notes:
• Up to 5 stations can be stored in each
memory bank.
• You can disable certain memory banks
that you do not want to use (see chapter
"User settings", section "Making settings
in the "TUNER" menu", menu item "BAND
SELECTION"). Deactivated memory banks
are skipped during the source selection
with the SRCbutton
@
.
Tuning into a station
There are various ways of tuning into a station:
Starting station seek tuning
쏅 Turn rotary control
7
one notch counter-
clockwise or clockwise to start station seek
tuning.
The display brie y shows "SEARCH AUTO".
The radio tunes into the next receivable sta-
tion.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only tra c information stations
are tuned into if the priority for tra c infor-
mation ( ) is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SENSITIVITY").
Tuning into stations manually
쏅 Press the rotary button
7
once to activate
manual station tuning.
The display brie y shows "SEARCH MANUAL".
쏅 Turn the rotary control
7
to change the fre-
quency in increments.
Note:
The manual station tuning is automatically
exited approx. 15 seconds after the last fre-
quency change, and the station seek tuning is
started by turning the rotary control
7
.
Storing stations or calling stored
stations
쏅 Select the desired memory bank.
쏅 If necessary, set the desired station.
쏅 Press the station button 1 - 5
>
for approx.
2 seconds to store the current station under
the button.
- or -
쏅 Brie y press the station button 1 - 5
>
to call
up the stored station.
Scanning stations
With the scan function, you can scan either every
receivable station or every stored station of the
current waveband.
Note:
You can adjust the scan time for each station
(see the chapter "User settings", section "Mak-
ing settings in the "VARIOUS" menu", menu
item "SCAN TIME").
Scanning all receivable stations of the
waveband
쏅 Press the MENU button
2
for approx. 2 sec-
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
쏅 Brie y press the MENU button
2
to con-
tinue listening to the station that is currently
being scanned.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
