EasyManua.ls Logo

Blaupunkt San Remo MP26 - MP3;WMA Mode; MP3;WMA Mode Overview; Preparing an MP3;WMA CD

Blaupunkt San Remo MP26
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
DANSK
ENGLISH DEUTSCHFRANÇAISITALIANO
NEDERLANDS
SVENSKAESPAÑOL
PORTUGUÊS
front of each le name, e.g. "001", "002",
etc. The leading zeros must also be en-
tered.
MP3 tracks can contain additional infor-
mation such as the artist, album and track
names (ID3 tags). This device can display
ID3 tags (version 1).
When creating (encoding) MP3 les from
audio les, you should use bit rates up to a
maximum of 256 Kbit/sec.
This device can only play MP3 les that have
the ".MP3" fi le extension.
Notes:
To ensure uninterrupted playback,
do not try changing the le extension
to ".MP3" of any les other than MP3
les and then attempt to play them!
The device will ignore these invalid
les during playback.
Do not use "mixed" CDs containing
both non-MP3 data and MP3 tracks
(the device only reads MP3 les dur-
ing MP3 playback).
Do not use mix-mode CDs containing
both CD-audio tracks and MP3 tracks.
If you try playing a mix-mode CD, the
device will only play the CD-audio
tracks.
Switching to MP3 mode
MP3 mode is activated in the same way as
normal CD mode. For further information,
please read the section entitled "Switching
to CD mode" in the "CD mode" chapter.
Confi guring the display
The following settings require that an MP3
CD is in the device.
Confi guring the default display
You can display various types of information
on the current track:
Track number and playing time "TRCK-
TIME"
Track number and time "TRCK-CLK"
Directory number and track number
"DIR-TRCK"
Directory number and time "DIR-CLK"
Directory number and playing time
"DIR-TIME"
Note:
After the MP3 scrolling text was scrolled
once after a track change, the information
is permanently shown on the display.
To switch between the different display
options,
Press the MENU button 5.
Press the
or button 8 repeatedly
until "CD DISP" appears on the display.
Select the desired option with the or
button 8.
When you have nished making your chang-
es,
press the MENU button 5 twice.
MP3/WMA mode
02Milano_SRemoMP26_eng.indd 4702Milano_SRemoMP26_eng.indd 47 06.01.2006 13:04:07 Uhr06.01.2006 13:04:07 Uhr

Table of Contents

Other manuals for Blaupunkt San Remo MP26

Related product manuals