Press the or : repeatedly until
"DISP COL" appears on the display.
Press the
or button :.
The menu for mixing your own colour is dis
-
played. "R" and "G" are displayed with the
current values. The "R" setting flashes.
Press the
or button : repeat-
edly until the desired colour value is
displayed.
Press the
or button : to move
the selection mark behind the other
colour.
Adjust the colour components to suit
your preferences.
When you have finished making your chang
-
es,
press the
MENU button twice 9.
Selecting a display illumination during a
colour scan
Press the
MENU button 9.
Press the
or button : repeat-
edly until "COL SCAN" appears on the
display.
Press the
or button : to start the
colour seek.
The device starts changing the display illu
-
mination colour.
If you want to adopt the currently set col
-
our,
press the
MENU button 9 once.
To start the seek tuning again,
press the
or button :.
If you found the desired colour,
press the
MENU button twice 9.
Display
To Next Page
Loading...
