60
External audio sources
If no CD changer is connected to the device,
you can connect an external audio source.
Audio sources can, for example, be port-
able CD players, MiniDisc players or MP3
players.
If you want to connect an external audio
source, you will need an adapter cable.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your authorised
Blaupunkt dealer.
The AUX input must be activated in the
menu.
Note:
If no CD changer is connected to the
device, the AUX menu item cannot be
selected.
Switching the AUX input on/off
Press the MENU button 9.
Press the or button : repeated-
ly until "AUX OFF" or "AUX ON" appears
on the display.
Use the buttons : to select be-
tween the options "AUX ON" and "AUX
OFF".
When you have finished making your chang-
es,
press the MENU button 9.
Note:
If the AUX input is switched on, you can
select it by pressing the SOURCE but-
ton 4.
Technical Data
Amplifier
Output power: 4 x 18 watts sine
at 14.4 V and
1% distortion
factor at
4 ohms.
4 x 26 watts sine
in accordance with
DIN 45324 at
14.4 V at 4 ohms.
4 x 50 watts max.
power
Tuner
Wavebands:
FM : 87.5 - 108 MHz
MW : 531 - 1 602 kHz
LW : 153 - 279 kHz
FM frequency response:
35 - 16,000 Hz
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out
4 channels: 2 V
Input sensitivity
AUX input: 2 V / 6 kΩ
Tel./Navi input: 10 V / 1 kΩ
Weight 1.36 kg
Subject to changes
External audio sources Technical data
To Next Page
Loading...
