EasyManua.ls Logo

Blaupunkt TravelPilot Lucca 5.3 - Basic Settings Configuration; Time Zone and Daylight Saving Setup; PIN and Theft Protection Setup

Blaupunkt TravelPilot Lucca 5.3
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Performing basic settings
Performing basic settings
Before working with the Lucca, you should set the
time zone that applies to your location so that the
correct arrival times are displayed during your
navigation.
In addition, the PIN query allows you to lock out
unauthorised persons from using the Lucca.
Setting the time zone
Touch the symbol in the main menu
of the Lucca.
The Settings menu displays.
Touch the symbol.
The Time menu is displayed.
Touch the Time Zone button.
A list with available time zones is displayed.
Touch the time zone in the list that is valid for
your current position (GMT without day
light
savings time).
Note:
The selection is facilitated by the display of the
capitols in the respective time zone.
T
ouch the OK
button.
Touch the Daylight Saving Time button to ac-
tivate (ON) or deactivate the daylight savings
time (OFF).
Note:
If the time is changed at your position or if
you drive into a different time zone, you must
adjust the corresponding settings.
T
ouch the F
ormat button to toggle between
12-hour and 24-hour display.
Touch the OK button.
The Settings menu displays.
Activating the PIN query
The PIN query allows you to lock out unauthorised
persons from using the Lucca.
Note:
During the PIN entry, you have 3 attempts to
enter the correct PIN or subsequently 3 at-
tempts to enter the correct PUK. If you enter
an incorrect PUK for the third time, your de-
vice will be blocked.
Touch the button in the Settings
menu.
The display shows the second page of the
menu.
Touch the symbol.
The Anti Theft Protection menu is
displayed.
Touch the Protection Setup button.
Follow the instructions and enter a self-se-
lected PIN.
T
ouch the OK button.
The initial confi guration of the PIN is followed by a
r
equest to ent
er a PUK. The PUK is used to unlock
the Lucca if you should forget the PIN.
Follow the instructions and enter a self-se-
lected PUK.
To secure your PUK:
Register under http://puk.blaupunkt.com
and follow the instructions.
Lucca_5_3_long_GB.indd 12Lucca_5_3_long_GB.indd 12 01.11.2007 14:11:49 Uhr01.11.2007 14:11:49 Uhr

Table of Contents

Related product manuals