Software of the Lucca | Active Cradle
43
Software of the Lucca
Reinstalling navigation software
For reinstallation purposes, the navigation soft-
ware of the Lucca and instructions are located on
the enclosed CD/DVD.
Updating the navigation software
To ensure that your Lucca is always state-of-the-
art, Blaupunkt offers software downloads at regu-
lar intervals. They can be found on the Blaupunkt
Internet site www.blaupunkt.com.
Follow the instructions on the display of the
Lucca.
Active Cradle
A Active Cradle is available as an option from your
specialised Blaupunkt dealer and expands the
functions of the Lucca.
The Connect Cradle allows
you to transfer a compos-
ite video signal (back-up
camera, DVD player).
The 4-pole 3.5-mm jack
connector contains one
audio and video input.
As soon as a signal is
present at the Con-
nect Cradle and the Luc-
ca is installed in the Con-
nect Cradle, the image and sound of
the source is shown on the display of the Lucca
(Lucca must be switched on).
Accessories
You can obtain a cable (Smart Cable) as an acces-
sory which expands the functions of the Active
Cradle with the following functions:
Power supply of the Lucca.
Switching the Lucca on and off via ignition.
Muting the radio f
or travel instructions.
Voice output and music playback of the Lucca
via the loudspeakers of the car sound sys-
tem.
•
•
•
•
Lucca_5_3_long_GB.indd 43Lucca_5_3_long_GB.indd 43 01.11.2007 14:12:04 Uhr01.11.2007 14:12:04 Uhr
To Next Page
Loading...
