94
Switching traffic information
priority on/off
➮ Press the TRAF button ;.
Traffic announcement priority is active
when the traffic-jam symbol lights up in
the display.
Note:
You will hear a warning beep:
● if you leave the reception area of a
traffic information station that you
are currently listening to.
● if, while listening to a CD/MP3,
MMC or a CD in the changer, you
leave the reception area of a traffic
information station that the system
is tuned into and the subsequent
automatic search cannot find a
new traffic information station.
● if you retune the radio from a traffic
information station to a station that
does not broadcast traffic informa-
tion.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Once the traffic report has been played,
the system will switch back to the pro-
gramme that you were listening to be-
fore.
DAB-FM traffic information
source
If traffic information priority is activated,
the device automatically switches to an
incoming traffic announcement being
broadcast via DAB within a DAB broad-
casting network (in DAB mode) or via
FM (in radio mode, see RDS-EON). In
AUX, Compact Drive MP3, MMC/SD,
CD and CD-changer mode, you will
hear traffic announcements played from
the source that was active last (either
DAB or radio).
TRAFFIC INFORMATION
To Next Page
Loading...
