6
MAINTENANCE
Before cleaning, make sure the power has been turned off at the circuit breaker panel and that the
heating element of the heater is cool
1 Every heater should be inspected before each use, and at least annually by a
qualified service person
2 The appliance must be kept clear and free from combustible materials,
gasoline and other flammable vapors, and/or liquids
3 The flow of ventilation air must not be obstructed. Be sure to check the fan assembly and
ensure the motor and blade are operating properly
4 Compressed air may be used to keep components free of dust and dirt
build up.
WARNING
Any non-routine maintenance must be performed by an authorized service representative.
Pre-Start Checklist
1
Heater must be level and lockable wheels must be in the locked position
2
Make sure fan switch and heat selection switch are in the “OFF”
position.
3
Make sure the air intake is free from any obstruction(s)
4
Make sure the heater outlet is free from any obstruction(s)
5
Make sure the heater is properly grounded
6
Check power supply voltage and amps.
To Next Page
Loading...
