Blaze 400 D User Manual

1-800-486-4328
1-204-633-1999
100 Eagle Drive
Winnipeg, MB Canada
sales@hermannelson.com
www.hermannelson.com
OIL/NG/LP FIRED SPACE HEATER: BLAZE 400 D/G
(AXIAL/TURBO)
REPORT # 0367MH007S
Installation Instructions-Manual-Maintenance-Parts List
CAUTION: DO NOT TAMPER WITH HEATER OR ITS CONTROLS. CALL A QUALIFIED SERVICE TECHNICIAN
Retain manual for future reference June 19/14
CERTIFIED FOR USE IN CANADA AND THE U.S.A.
CAMPO EQUIPMENT CO. LTD. (ECOBLAZE)
6 Carson Court, Brampton, ON, CANADA, L6T 4P8
Tel: (905) 793-2525 | Fax: (905) 793-8768 | www.campoequipment.com Page | 1

Blaze 400 D Specifications

General

Brand	Blaze
Model	400 D
Category	Heater
Language	English

Summary

Installation, Manual, and Parts List

General Safety Warnings

Covers fire, burn, inhalation, explosion, and general hazards.

Pre-Start Instructions and Usage Precautions

Installation and Operational Warnings

Details warnings for installation, ventilation, and placement.

Installation Regulations and Fuel Requirements

Gas and Propane Installation Standards

Conforms installation to local codes and specific fuel requirements.

Heater Service and Installation Guidelines

Combustion Air and General Warnings

Fuel Cylinder Connection Procedures

LP Cylinder Clearance and Safety

External Fuel Tank Connection (Blaze 400 D)

Fuel Type and Operation (Blaze 400 G)

Electrical System and Installation

Electrical Grounding and Wiring

Outlines wire gauge, grounding instructions, and supply requirements.

Heater Sequence of Operation

Heater Operating Instructions

Starting the Heater Safely

Guides on how to start the heater safely and correctly.

Stopping the Heater Safely

Guides on how to stop the heater safely and correctly.

Troubleshooting Heater Startup Issues

Heater Failure to Start Procedures

Steps to take when the heater fails to start.

Important Cautions and Warnings

General Operational Cautions

Installation Instructions and Flue Pipe Setup

Venting and Installation Clearances

Ductwork and Maintenance Procedures

Component Maintenance and Checks

Temperature Controller and Fan Maintenance

Motor, Gas Train, and Heat Exchanger

Burner Performance and Diagnostics

Oil Burner Settings and Combustion Air

Beckett CG10-24 Burner Settings

Burner Assembly and Service Procedures

Electrode and Turbulator Settings

Beckett CF375 Oil Burner Adjustments

Combustion Air Adjustment Guide

Firing Rate and Thermostat Control

Thermostat Operation Guide