Blinc Y6600 - Profile Functionality; Getting Started and Charging; Initial Setup Steps; Battery Charging Process

Bluetooth Intercom function,FM radio.
To use your headset, your phone or music device should
support the following Bluetooth profiles:
Profile Description
HFP(Hands-freeProfile
)
Providing a wireless means for both
remote control of the Mobile Phone by
the Hands-Free device and voice
connections between the Mobile Phone
and the Hands-Free device.
A2DP (Advanced Audio
Distribution Profile)
AVRCP
Stereo music streaming.
MP3 CONTROL
Bluetooth Interference Issues:
The quality of Bluetooth transmission may also be affected by the position of your music device.
Should you experience choppy or distorted audio, move the position of your music device or
phone to a different location until the signal improves.
Getting started:
Before you can use your headset, you should first:
Charge the headset battery.
Connect Audio Plug
Pair the headset with a device, for example, a mobile phone.
Charging:
The headset comes with a built-in rechargeable battery. We recommend that you charge the battery
before using the headset for the first time.
Connect the charger to the device.
The charging time is about 2 hours.During charging,Red LED is on. When the battery is fully
charged, Red LED is off. When you using the headset, if you hear a cadent tone, and Red LED is
flashed , battery needs recharging.