Blinc Y6600 User Manual

Bluetooth stereo headset user guide
Bluetooth Introduction:
The Bluetooth headset is a portable headset solution based on Bluetooth wireless technology.
Bluetooth wireless technology is a short-range radio communication technology intended to
replace the cables connecting electronic devices. The technology uses a globally available
frequency range intended to ensure communication compatibility worldwide.
Caution:
Listening at full volume to music or voice through a headset may damage your hearing.
BlueToothHeadSet Control Buttons and Display Screen:
BUTTON_MFB Multifunction Button
BUTTON_VOL+ Volume Increase
BUTTON_VOL- Volume Decrease
BUTTON_MP3_Preview MP3 Preview----preview MP3
BUTTON_MP3_Next MP3 Next----Pause MP3 playing/Next MP3
In this Bluetooth headset design, the three buttons above were integrate to a Control Button.
Middle is Multifunction Button(BUTTON_MFB), which can be use to control several headset
functions. You can turn the Control Button to adjust speaker volume(BUTTON_VOL+/-), more
detail as follow, you can turn deasil to increase volume , also you can turn anticlockwise to
decrease volume.
Bluetooth headset supports profiles and functions:
Hands-Free Profile(HFP), HeadSet Profile(HSP), Advanced Audio Distribution Profile(A2DP),
Audio/charger
socket
LED LIGHT
Control Button
mp3/ preview
MP3 next

Blinc Y6600 Specifications

General

Connectivity Technology	Wireless
Wireless Technology	Bluetooth
Microphone Type	Built-in
Driver Size	40mm
Frequency Response	20Hz - 20kHz
Impedance	32 Ohms
Microphone	Yes
Connection	3.5mm jack
Cable Length	1.2m

Summary

Bluetooth Introduction and Technology

Bluetooth Technology Overview

Explains Bluetooth wireless technology as a short-range radio communication for replacing cables, using a globally available frequency range.

Headset Controls and Display

Headset Button Functions

Details individual buttons like MFB, Volume Up/Down, and MP3 Preview/Next functions for headset operation.

Control Button Operation

Describes the integrated Control Button for adjusting volume and its functions, including the Multifunction Button.

Supported Bluetooth Profiles

Profile Functionality

Lists essential Bluetooth profiles like HFP, HSP, and A2DP required for headset functionality with phones and music devices.

Getting Started and Charging

Initial Setup Steps

Outlines the initial steps to use the headset: charging the battery, connecting the audio plug, and pairing with a device.

Battery Charging Process

Details the charging time, the indicator for charging (Red LED on), and low battery notification (Red LED flashed).

Headset Operation

Turning Headset On and Off

Provides instructions on how to power the headset on and off using the Multifunction Button, including audio cues.

Pairing with a Mobile Phone

Guides the user through the pairing process, including entering pairing mode and using the default passkey '0000'.

Using the Headset

Music Playback Control

Explains how to control music playback: stop/pause, restart, select preview, and select next tracks.

Call Handling

Details how to answer, terminate, and reject incoming calls using the Multifunction Button.

Voice Dial Activation

Describes how to activate voice dial by pressing and holding the Multifunction Button during idle time.

Volume Adjustment

Explains how to adjust speaker volume by turning the Control Button clockwise to increase and counter-clockwise to decrease.

Advanced Features

Sound Transfer Between Devices

Details how to transfer audio sound between the headset and the connected phone during a call.

Bluetooth Intercom Function

Introduces the Bluetooth Intercom feature, covering first-time use and the pairing process between two headsets.

Intercom Call Procedures

Making Intercom Call as Master

Explains how the master role headset initiates an intercom call and handles music playback after the call.

Making Intercom Call as Slave

Describes how the slave role headset accepts intercom calls and manages music playback after the call.

Headset Mounting

Installing the Clip Mount

Details the installation of headset clips onto helmets, including types and use of spacers for different helmet shells.

Using Fastening Clamp Mount

Step-by-step guide for attaching the headset clip using screws and adjusting for the best fit on a helmet.

Using Adhesive Mount

Instructions for attaching the headset clip using double-sided adhesive, emphasizing proper surface preparation and positioning.

Mounting the Headset

Explains how to slide and lock the headset into the mounted clip and attach the ear speaker and microphone arm inside the helmet.

Headset Removal and Specifications

Quick Removal of Headset

Describes the procedure for quickly removing the headset from its mount by pushing down a lock mechanism.

Product Dimensions

Provides the physical dimensions of the headset unit: 8cm*3cm*2.5cm.

Regulatory Information

FCC Compliance Statement

States compliance with FCC Part 15 rules, subject to conditions regarding interference and operation.