Blitz FATT DC - Timer Mode Descriptions; Automatic Timer Function

To Next Page

To Previous Page

Description of Modes

The idling time is automatically set by the timer. Idling time varies on

what mode the auto timer is set on and the variations of the vehicles

ignition pulse.

-Mode display is located on the left side of LCD

1. Automatic Timer A

When the FATT DC is turned on the Automatic Timer

mode will be activated.

The "TIMER A" will be displayed

1 - Power Button

2 - Minute Button ( Start / Stop for stop watch function ) To set the minimum time of the auto timer press the

3 - Second Button ( Lap button for stop watch function ) MINUTE button once and the screen will flash. Then

press SECOND button to set the base time between

Settings

0 to 50 seconds.

** When the A appears, the Automatic Timer function is activated.

When the Timer is activated the modes will appear as follows: Press the MINUTE button on the Temperature or Battery Voltage display

to turn the Automatic Timer on or off. Make sure that the letter A appears

1 - Automatic Timer The A means auto timer is activated

2 - Manual Timer There are 4 different auto timer modes. Press the MINUTE button twice when

3 - Temperature in Automatic Timer Mode. The automatic timer modes will go as follows

A - H A - S E -L E - H A - L

Press the SECOND button to switch between the modes.

4 - Battery Voltage

5 - Stop Watch A - L mode will start to calculate time to automatic

function mode after 1800 rpm. Low setting

6 - Lap Time Display A - H mode will start to calculate time to automatic

function mode after 1200 rpm. Medium setting

A - S mode will start to calculate time to automatic

7 - Off function mode after 900 rpm. High setting

E - L mode will add time according to how long the

Press the POWER to button to switch to the next mode. ignition has been on roughly 55 seconds per hour

E - H mode will add time according to how long the

ignition has been on roughly 130 seconds per hour

Page 4

Online Manual Not For Resale Purposes