To Next Page
E
Ellen HarrisAug 12, 2025
What to do if Blizzard Lighting Flood Light has no power?
- JjonathanwilliamsAug 12, 2025
If your Blizzard Lighting Flood Light has no power, check the fuse, AC cord, and the circuit for any malfunctions.
What to do if Blizzard Lighting Flood Light has no power?
If your Blizzard Lighting Flood Light has no power, check the fuse, AC cord, and the circuit for any malfunctions.
Why is my Blizzard Lighting Flood Light fixture not responding or responding erratically?
If your Blizzard Lighting Flood Light fixture is not responding or responding erratically, ensure all connectors are properly and securely seated. Use only DMX cables, install a terminator, check all cables for defects, and reset the fixture(s).
What to do if my Blizzard Lighting Flood Light keeps blowing fuses?
If your Blizzard Lighting Flood Light's fuse keeps blowing, inspect the AC cord and circuit for any damage. Also, verify that moving parts are not restricted and that the unit’s ventilation is not obstructed.
General| Beam Angle | 25° |
|---|---|
| Housing Material | Aluminum |
| LEDs | 12 x 10W RGBW LEDs |
| Control | DMX512, Standalone, Sound Active |
| DMX Channels | 4/5/9/10 |
| Power Supply | 100-240V, 50/60Hz |
| IP Rating | IP20 |
