3) Display code representative function:
Remark:
● The heating temperature、drinking temperature and return difference temperature
have been set up well in factory, user cannot change the default temperature.
● The set time of the “Timer On” means the start working time of the machine.
● The set time of the “Timer Off” means the stop working time of the machine.
● Please set up the “Current Time” according to the local standard time.
7. The presets in factory:
1) Temperature: the green (drinkable) indicator light on when it reach 93℃ (heat up
to 100℃ right along), the outlet water temperature is 93~100℃. The outlet water
temperature is the same as the displayed temperature.
2) Elevation: for adapting different regional pressure, user can contact the local sales
agent for help. By using the switch “Plateau area heating mode” in the circuit board
in the machine, user need not to have further adjustment generally.
8. Timer:
1) Machine remains OFF, first set up the “Current Time”, the display code can
contrast with the sheet above, and please set the time according to the local standard
time. Setting procedure: 1.press the “Set” button to switch
“Hour”/”Minute”/”Second” code; 2.press “Plus” or “Minus” button to set your
needed time, then exit to save the data; 3.repeat the procedure to set up other two
data.
2) Setting “Timer On”, you can contrast with the sheet above when operating.
Procedure: 1.press “Set” button to switch between “Hour”/”Minute”; 2.press “Plus”
To Next Page
Loading...