What to do if the compressor is not running on my Blizzard BCF20 Chiller?
If the Blizzard Chiller's compressor isn't running, first check the fuse or circuit breaker and replace or reset if necessary. Ensure the power cord is plugged in securely. Also, verify that the thermostat isn't set too high and lower it if needed. Finally, if the unit is in defrost cycle, wait for it to complete.
Why is the cabinet temperature too warm in my Blizzard Chiller?
If the Blizzard Chiller's cabinet temperature is too warm, start by setting the thermostat to a lower temperature. Make sure that the airflow isn't blocked by rearranging the product inside. Allow enough time for warm products to cool down after placing them inside. Check the fuse or circuit breaker, replacing or resetting if needed. Clean the condenser coil if it's dirty. Ensure doors are closed and avoid prolonged door openings.
How to fix a Blizzard BCF20 condensing unit that runs for long periods?
If the condensing unit of your Blizzard Chiller runs for extended periods, allow sufficient time for warm products to cool down. Ensure that doors are closed properly and not left ajar. Check the door gaskets and ensure they are sealing correctly; clean them with soap and water or replace if necessary. Clean the condenser coil if it's dirty. If the evaporator coil is iced over, unplug the unit to allow it to defrost. Check that the thermostat isn't set too cold and ensure door gaskets are sealing.
What causes a Blizzard BCF20 Chiller to be noisy?
If your Blizzard Chiller cabinet is noisy, check for any loose parts and tighten them. Also, make sure the tubing isn't vibrating against other tubing or components.
To Next Page
General