CLEANING THE FAN BLADE AND MOTOR
If necessary, clean the fan blades and motor with a soft cloth, if it is necessary
to wash the fan blades, cover the fan motor to prevent moisture damage.
CLEANING THE INTERIOR OF UNIT
■ When cleaning the cabinet interior, use a solution of warm water and mild soap.
■ Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the
stainless-steel surface.
■ Wash door gaskets on a regular basis, preferably weekly. Simply remove door gasket from the
frame of the door, soak in warm water and soap for thirty (30) minutes, dry with soft cloth, and
replace.
■ Check door gaskets for proper seal after they are replaced.
■ Periodically remove the shelves and pilasters from the unit and clean them with mild soap and
warm water. To remove the pilasters, first remove the shelves and shelf brackets. Then,
simply lift the pilaster up and out.
■ Ensure all stainless-steel surfaces are dried and apply stainless steel cleaner to exterior
panels to preserve the finish
WARNING
Disconnect power cord before cleaning any parts of the unit.
To Next Page
Loading...