Blodgett Combi BCP - Page 27

- 27 -
USB Key (2), Software Updating Menu
 This function is possible if the controller is updated with software version 1.64 or higher.
1. Oven must be off.
2. Insert USB key in oven.
3. Turn oven on.
4. This menu appears.
Not active
INFO: Shows current
software version in oven
(Not active)
Not active
Not active
Not active
Not active
Not active
INFO: Shows software
version to which controller
is being updated
(not active)
Not active
Not active
Press OK to start updating
process
Not active
Power switch