- 54 -
Oven Set-up (Set-up Menu) Continued
Max. number of recipes and steps.
Is fan with frequency inverter?
Control voltage for frequency inverter, 5 or 10V. Only 10V
is used.
Should Delta-T and Cook & Hold be selectable?
Should core temperature 1 be selectable?
Should core temperature 2 be selectable.
Max. preheat temperature 300°C/572°F (250°C or 300°C).
CombiNet is access to recipe editing through web and
offline through USB key.
Is oven equipped with ClimaOptima (automatic humidity
control)?
Is oven equipped with CombiClean or CombiWash (auto
cleaning system)?
Monitoring of content of detergent container during
CombiWash.
Drain cooling with water nozzle (condensation).
Select source for SW update through web.
Setting for use at exhibitions (no heat and with temperature
simulation).
Adjustment of oven temperature sensor.
Adjustment of core temperature sensor 1.
Adjustment of core temperature sensor 2.
Activate fan alarm (Err 14, 15).
Never, 10min,
30min, 60min
Restart after power failure. Select duration of interruption
until oven restarts automatically.
Descale program for steam generator (KPE).
Scale diagnosis, monitoring of scale in generator. Select
hardness of water.
Multistep fan speed, 20-100%, 1 step = 10%
1-3 OPEFRATOR LEVEL
1-19 MANAGER’S LEVEL
1-49 SERVICE LEVEL