32 / EN
Fully Automatic Coffee Machine / User Manual
When the appliance is reused again for the first time after empty
system function is used; press the hot water button until water
comes out of the spout.
6.4 Manual Cleaning / Rinsing Function
You can manually clean / rinse the coffee nozzle before or after use. When
in idle, press once.
• After cleaning / rinsing, the appliance will return to idle.
• The water that comes out of the coffee nozzle is hot and
is collected in the drip tray underneath. Avoid contact as it
splashes around.
• If the appliance has not been used for a long period of time,
this function is suggested to be used.
Using this function before coffee preparation will also ensure
hotter coffee.
Deactivating the auto-clean mode
Your appliance cleans itself automatically before and after each brewing
operation. You may follow the steps below to deactivate the auto-clean
mode.
• Turn on the appliance by pressing the power on/off button and wait until
it goes into idle mode.
• Open the front cover.
• Press the power on/off button for 5 seconds and a beep will sound.
• Close the front cover.
• The auto-clean operation has been cancelled.
6 Cleaning
To Next Page
Loading...