Blomberg DV 17600 W User Manual (English)

Questions and Answers:

C
Cheryl TorresAug 12, 2025
Why does my Blomberg DV 17600 W Dryer take so long to dry?
- J
  John HendersonAug 12, 2025
  If the drying process on your Blomberg Dryer is taking longer than expected, several factors could be the cause. First, ensure that the lint filter is clean, as a clogged filter restricts airflow. If cleaning doesn't suffice, the filter meshes may be clogged and require washing with water. Check that the ventilation grids on the front of the dryer are free from obstructions. Insufficient ventilation in a small room can also prolong drying times; try opening a door or window to improve airflow. A buildup of lime deposit on the dampness sensor can affect performance, so clean the sensor. Avoid overloading the dryer, and ensure your laundry is spun at a higher speed in your washing machine to remove excess water before drying.
C
Christina HoustonAug 15, 2025
What to do if my Blomberg Dryer does not switch on?
- F
  franklincraigAug 16, 2025
  If your Blomberg Dryer isn't starting, begin by verifying that it's properly plugged in. A loose connection can prevent the dryer from powering on. Next, ensure that the loading door is completely closed, as the dryer won't start if the door is ajar. Confirm that a program is correctly set and that the dryer isn't paused. Lastly, check whether the childproof lock is activated, and if so, deactivate it.
S
Scott MurphyAug 19, 2025
How to fix the flashing “Filter cleaning” LED on my Blomberg DV 17600 W?
- P
  Paula MortonAug 19, 2025
  If the 'Filter cleaning' LED is flashing on your Blomberg Dryer, it indicates that the lint filter may be full or the filter meshes may be clogged. Clean the lint filter. If the light persists, wash the filter with water to remove any buildup.
C
Charles RodriguezAug 23, 2025
What does it mean when “Drying” LED flashes on Blomberg DV 17600 W?
- B
  Bruce CooperAug 23, 2025
  If the “Drying” LED flashes on your Blomberg Dryer, it indicates a heat sensor failure. The dryer will stop heating and end the program. In this case, turn off the dryer, remove the laundry, and contact an authorized service technician for assistance.
A
Ashley HesterAug 27, 2025
What to do if Blomberg DV 17600 W Dryer program is interrupted?
- B
  Brittany RobertsonAug 27, 2025
  If your Blomberg Dryer program stops unexpectedly, the loading door may have been opened during operation. Ensure that the loading door is properly closed. Also, check for any power interruptions. If there was a power outage, press the “Start/Pause/Cancel” button to restart the program.
K
kevin96Aug 31, 2025
Why is the “End / Anticrease” LED flashing on my Blomberg DV 17600 W Dryer?
- A
  Alicia PotterAug 31, 2025
  If the 'End / Anticrease' LED is flashing on your Blomberg Dryer, the 2-hour anti-creasing program may be active. To resolve this, turn off the dryer and remove the laundry.
J
jenniferleeSep 3, 2025
Why has laundry shrunk in my Blomberg DV 17600 W?
- D
  Darius ChapmanSep 4, 2025
  Laundry shrinkage, felting, or deterioration in your Blomberg Dryer can occur if the selected program isn't suitable for the fabric type. Always dry only laundry that is appropriate for machine drying, and check the care labels on your garments before selecting a cycle. Ensure you select a program with a suitable low temperature setting for the laundry type.
J
Jamie ThompsonSep 7, 2025
What does it mean when the “End / Anticrease” LED is on in my Blomberg Dryer?
- B
  Brian ChanSep 7, 2025
  The 'End / Anticrease' LED being on indicates that the drying program on your Blomberg Dryer has finished. Turn off the dryer and remove the laundry.