Blomberg ROEN8232BP

To Next Page

To Previous Page

EN / 36

Water droplets appear while cooking

• The steam generated during cooking

condenses when it comes into contact

with cold surfaces outside the product

and may form water droplets. >>> This is

not an error.

Metal sounds are heard while the product

is warming and cooling.

• Metal parts may expand and make

sounds when heated. >>> This is not an

error.

The product does not work.

• Fuse may be faulty or blown. >>> Check

the fuses in the fuse box. Change them if

necessary or reactivate them.

• The appliance may not be plugged to the

(grounded) outlet. >>> Check if the appli-

ance is plugged in to the outlet.

• (If there is timer on your appliance) Keys

on the control panel do not work. >>> If

your product has a key lock, the key lock

may be enabled, disable the key lock.

Oven light is not on.

• Oven lamp may be faulty. >>> Replace

oven's lamp.

• No electricity. >>> Ensure the mains is

operational and check the fuses in the

fuse box. Change the fuses if necessary

or reactivate them.

Oven is not heating.

• The oven may not be set to a specific

cooking function and/or temperature.

>>> Set the oven to a specific cooking

function and/or temperature.

• The oven door may be open. >>> Make

sure the oven door is closed. If the oven

door remains open for more than 5

minutes, the time setting made for cook-

ing is cancelled and heaters do not work.

• For the models with timer, the time is not

set. >>> Set the time.

• No electricity. >>> Ensure the mains is

operational and check the fuses in the

fuse box. Change the fuses if necessary

or reactivate them.

• The oven door may be open. >>> Make

sure the oven door is closed. If the oven

door remains open for more than 5

minutes, the time setting made for cook-

ing is cancelled, heaters will not work and

the lamp will not switch on.

(For models with timer) The timer display

flashes or the timer symbol is left open.

• There has been a power outage before.

>>> Set the time / Turn off the product

function knobs and again switch it to the

desired position.

Error codes/reasons and possible solutions

Error codes Error reasons Possible solutions

Er 5

Meat probe communication er-

ror

Contact the authorized service to be able to cook again

with the meat probe. Remove the meat probe and set

the function selection knob to off (0) to be able to cook

normally without the meat probe in the oven. You may

then continue cooking without the meat probe.

Er 1 - Er 7 Communication errors