To clean the condenser:
1. Open the door. Wait for the appliance
to cool down.
2. Open service door latch.
The service door will open. Then turn
3. Pull the condenser out at the handle.
4. Rinse condenser – vertically and hori-
zontally – thoroughly under running
water. Let water drain thoroughly.
5. Push condenser – with the lettering
embossed at the edge facing up – ful-
ly in, then fix the locking level.
6. Close the service door.
Drum ribs
At the rips on the inside of the drum are
moisture sensors, signalling to the appli-
ance when the textiles are dry.
To clean the drum ribs:
1. Open the door. Wait for the appliance
to cool down.
2. Wipe all drum ribs with a soft cloth
moistened with vinegar. Wipe dry with
a soft cloth.
Do not use solvents, naphtha or simi-
lar! Fire or explosion hazard!
the locking level .
Clean drum ribs
– after approx. 50 drying cycles, or
– four times a year.
11
To Next Page
Loading...
