Tumble Dryer Service Handbook
29
Step 4.3 Er:aa: “aa” shows the Error Code. If there is not any error, user will see “- -“ in the
display.
Er 07: Error Code "7" has occured. User can check the definition of error from Failure Codes.
Step 5: If Start/Pause/Cancel button is pressed once, the next error will be seen. By pressing
Start/Pause/Cancel button in series, the last 20 errors can be seen in order. When you are in
error mode user will follow the numbers of errors in "RPM" window.
[ 02] : Show the order of the errors.
To Next Page
Loading...
