To Next PageTo Next PageWhat to do if Network Indicator light continues to flash red while setting up BloomSky SKY1 Weather Station?
If the Network Indicator light continues to flash red during setup, it means the device isn't getting an IP address from your router. Ensure that your router’s DHCP function is enabled.
Why Network LED always shows orange color and flash when BloomSky Weather Station is in Wi-Fi setting mode?
When the Network LED shows orange and flashes in Wi-Fi setting mode, it means the device isn't receiving Wi-Fi information correctly. Please check that your Wi-Fi is not on a 5 GHz band and that your device is within 5 feet of your router.
How to fix a BloomSky SKY1 Weather Station when the power indicator quickly flashes green 3 times?
If the power indicator flashes green 3 times quickly every 3 seconds, the battery is low and the device needs to charge.
General| Brand | BloomSky |
|---|---|
| Model | SKY1 |
| Category | Weather Station |
| Language | English |
Describes the intended purpose of the BloomSky Outdoor Station for recording and sharing weather data and pictures.
Lists the necessary prerequisites for using the BloomSky, including iOS/Android versions and Wi-Fi.
Provides essential guidelines for a successful setup process, including app installation and Wi-Fi connection.
Offers advice on optimal placement of the BloomSky for accurate weather data collection and clear sky views.
Details the specifications of the built-in ultra-wide angle HD camera, including shooting angle and lens type.
Outlines the types of sensors used, their measurement capabilities, and operating temperature/accuracy.
Provides crucial safety instructions for installation and use to prevent shock, falls, and other hazards.
Details how to properly clean the camera lens to maintain image quality, advising against certain cleaning agents.
Advises on careful handling of the product due to sensitive components and potential damage.
