BLOWTHERM PACK-P AR 93

Questions and Answers

T
tleeAug 17, 2025
How to fix a BLOWTHERM PACK-P AR 93 when the burner does not turn on?
- D
  Daniel GarciaAug 17, 2025
  If the burner of your BLOWTHERM Boiler does not turn on, you should first check the electrical connections and ensure they are properly connected. Next, verify that there is a regular fuel supply reaching the burner. After that, inspect the fuel supply system for integrity and cleanliness, making sure no air is present. Also, confirm that ignition sparks are forming regularly and that the burner appliance is functioning correctly. Check the boiler safety thermostat, ensuring it hasn't intervened and requires a manual reset. Finally, check the calibration of the environment thermostat.
M
Morgan MannAug 20, 2025
What to do if my BLOWTHERM PACK-P AR 93 reaches temperature but the heating system is cold?
- M
  Maria EspinozaAug 20, 2025
  If your BLOWTHERM Boiler reaches the appropriate temperature but the heating system remains cold, you should check that there is no air in the system and that the circulation pumps are functioning correctly. In addition, verify the ambience thermostat setting to ensure it is properly configured.
B
Brittany RosarioAug 23, 2025
Why does my BLOWTHERM Boiler get easily covered with soot?
- B
  Barry VelezAug 23, 2025
  If your BLOWTHERM Boiler gets easily covered with soot, start by checking the burner regulation through smoke analysis. Then, examine the fuel quality to ensure it meets the required standards. Also, check the flue for any clogging and ensure the burner air intake is clean and free from dust.
A
Ashley ReyesAug 26, 2025
What to do if BLOWTHERM Boiler burner turns on then immediately off?
- J
  John GrayAug 26, 2025
  If the burner turns on well but then turns off immediately after in your BLOWTHERM Boiler, you should check the pilot flame, the air calibration, and ensure that the burner appliance is working correctly.
L
Luis LopezAug 28, 2025
Why do I smell gas from my BLOWTHERM PACK-P AR 93 Boiler?
- M
  Michael GutierrezAug 28, 2025
  If you smell gas or un-combusted products from your BLOWTHERM Boiler, it's important to check the seal of the fuel supply system, especially if it uses gas fuel. Also, check the hermetic seal of the smoke circuit, including the door, smoke box, and boiler/flue connection.
J
Justin YoungAug 31, 2025
Why does my BLOWTHERM PACK-P AR 93 not reach set temperature?
- C
  Christine MartinAug 31, 2025
  If your BLOWTHERM Boiler does not reach the set temperature, you should ensure that both the smoke side and water side of the boiler are clean. Check the combination, regulation, and overall performance of the burner. Verify the regulation of the pressure switches and confirm they are working correctly. Also, inspect the position of the thermostat gauges and ensure the boiler capacity is appropriate for the plant.
Z
zingramSep 3, 2025
What causes the safety valve of the BLOWTHERM PACK-P AR 93 Boiler to intervene often?
- E
  Edward GoodwinSep 3, 2025
  If the safety valve of your BLOWTHERM Boiler intervenes often, you should check the system loading pressure. Also, check the efficiency of the expansion vessel and the calibration of the valve itself.
G
Gloria BarberSep 5, 2025
How to troubleshoot a BLOWTHERM Boiler with difficult burner adjustment and no output?
- J
  James ChristensenSep 5, 2025
  If the burner of your BLOWTHERM Boiler is difficult to adjust or has no output, you should check the burner, boiler, boiler/flue pipes, and flue for cleanliness. Also, verify the hermetic seal of the smoke circuit, including the door, smoke box, and boiler/flue connection. Ensure the fuel supply is flowing regularly and verify the effective power of the burner. Finally, check for the presence of scale and consider carrying out a chemical washing.
B
Barbara RiosSep 8, 2025
Why is there water on the floor near the smoke box of my BLOWTHERM Boiler?
- L
  lynn16Sep 8, 2025
  If you find water on the floor near the smoke box (condensate) of your BLOWTHERM Boiler, verify that the probes have been positioned correctly. Ensure the boiler thermostat has been regulated correctly (between 60 and 90°C) and is functioning well. Also, verify that the discharge in the fumes box is connected with a gathering ground. Check that the anti-condensate pump and its regulation (if present) are working correctly. Finally, check that the temperature of the return water of the plant is not less than 50°C.
A
Aaron ClarkSep 12, 2025
What causes the safety thermostat to intervene in a BLOWTHERM PACK-P AR 93?
- C
  chloe23Sep 12, 2025
  If the safety thermostat intervenes in your BLOWTHERM Boiler, check the electric wires. Also, check that the gauges bulbs are positioned correctly and all thermostats are working correctly.

Summary

General Information

General Warnings

Crucial safety and usage guidelines for the boiler and manual.

Certification and Compliance

Details EC mark attestation and conformity to European Directives and standards.

Safety Rules

Essential rules for safe operation, handling, and maintenance of the appliance.

Appliance Description

Overview of the boiler's configuration, components, and operating principles.

PACK-P;AR 93-405 Dimensions and Technical Features

Technical data and physical dimensions for PACK-P/AR models 93 through 405.

PACK-P;AR 465-1100 Dimensions and Technical Features

Technical data and physical dimensions for PACK-P/AR models 465 through 1100.

PACK-P;AR 1250-3500 Dimensions and Technical Features

Technical data and physical dimensions for PACK-P/AR models 1250 through 3500.

Identification Elements

Information on identifying the boiler via its technical data plate.

Delivered Documents

Lists the essential documents provided with each boiler for reference and warranty.

Standard Instrument Panel

Details the components and function of the standard electrical control panel.

Standard Electrical Diagram

Wiring diagram for single-stage burners, essential for installation.

Electrical Diagram for 2-Stage Burners

Wiring diagram specific to boilers with two-stage burners.

User Operations

Start-Up Procedures

Step-by-step guide for initial boiler start-up and automatic operation.

Turning Off the Boiler

Instructions for safely turning off the boiler for temporary or long periods.

Cleaning the Appliance

Guidance on how the user can clean the exterior of the boiler.

User Maintenance

Explains required periodic maintenance checks by the user for optimal performance.

Product Receipt Details

Information regarding the contents received with the boiler upon purchase.

Installation Procedures

Packaging and Handling

Instructions on how the boiler is packaged and should be handled.

Boiler Room Installation Requirements

Specifies requirements for the installation room, ventilation, and placement.

Combustion Products Discharge

Details the importance of correct flue coupling and discharge for efficiency and safety.

Hydraulic Connections

Recommendations for correct hydraulic connections, safety valves, and expansion vessels.

Water Supply Considerations

Guidelines on water pressure, quality, treatment, and avoiding contamination.

Working Temperature Limits

Specifies the maximum working temperature and acceptable temperature differences.

Condensate Problem and Prevention

Addresses the issue of condensate formation and methods to prevent it.

Standard Heating Installation Diagram

A schematic showing typical heating system components and their connections.

Electrical System Requirements

Outlines compliance with regulations and safety for the electrical system installation.

Control Panel Installation

Instructions for mounting and connecting the boiler's control panel.

Fuel Supply Line

Requirements for installing the fuel supply line according to regulations.

Possible Fuels

Lists the types of fuels compatible with the PACK P/AR boilers.

Burner Connection

Guidelines for connecting the burner, including electrical and setting aspects.

Cover Assembling (Models 93-1045)

Specific instructions for assembling the cover panels on certain boiler models.

Pre-Start Up Operations

Essential checks and preparations required before the first boiler start-up.

First Start-Up Procedure

Detailed steps for powering on the boiler and initiating its first operational cycle.

First Start-Up and Further Checks

Procedures for testing the appliance after initial start-up and performing subsequent checks.

Service and Maintenance

Warnings for Service Personnel

Important safety and operational guidelines for authorized service technicians.

Routine Maintenance Schedule

Outlines regular maintenance tasks essential for boiler longevity and performance.

Door Opening and Adjustment

Instructions on how to open, adjust, and maintain the boiler door.

Boiler Cleaning Procedures

Steps for cleaning the boiler's internal heat transfer surfaces and tubes.

Post-Cleaning Checks

Essential checks to perform after completing boiler cleaning operations.

Troubleshooting Common Faults

Identifies common boiler faults and provides remedies for resolution.

Spare Part Recommendations

Lists recommended spare parts for typical operational periods and emergencies.

Warranty Conditions

Outlines the terms and conditions required for the boiler's warranty to be valid.