EasyManua.ls Logo

Blu S1 - Installing SIM Card and Memory Card

Blu S1
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Warning
• Charge only indoors and in dry environments.
• For safety, the overheat protection will be active during charging. If
the system temperature reaches above the maximum level, the
device will automatically stop charging. The device will only resume
charging when normal operating temperature is reached.
• If there is no reponse after you press the power button or touch the
panel, press and hold the ‘power button and volume (+) key’ for
10 seconds, phone will power off, If you hold the ‘power button and
volume (+) key’ for 5 seconds more, it will restart.
• InFocus standard for water ingression criteria.
(1) Water ingression label become red color or contaminated.
(2) Water marks or corrosions on device PCB or components.
• Please make sure the temperature for adapter will not be higher
than 50
• Do not store your phone in temperatures higher than 60
• The operating temperature for this device is from -10 to 50
Installing SIM Card and
Memory Card
1 Put the thimble tool into the hole near SIM card
tray, then push until card tray pop up,and then
pull out the card with hand.

Related product manuals