EasyManua.ls Logo

Blu Studio 5.5 - Introduction; Installation of the SIM Card; Power On and Off; Password Lock

Blu Studio 5.5
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Introduction
Installation of the SIM Card
Please install the SIM card before using your phone.
Note: Please keep the SIM card out of the reach of children. The
SIM card and its contact are easily damaged due to scratching or
bending. Please be cautious when carrying, installing or taking out
the SIM card.
To insert SIM card:
1. Power off the mobile phone and remove the rear cover and
battery. Insert SIM card
2. Insert SD Card (For additional storage capacity).
3. Insert the battery and replace the rear cover of the mobile phone.
Power On and Off
On - Please ensure the SIM card has been properly inserted into the
phone. Long press the Power key to switch the phone on.
Off - In standby mode, long press on Power key until an options
menu appears. Select OFF in the menu and confirm in the pop-up
prompt to switch off the phone.
Password Lock
You may set a screen unlock picture or a PIN code lock as a security
measure. For further information regarding password locks,
password revision and other functions please enter the security
settings of the phone.
Single SIM
Slot
SD Card

Related product manuals