Blue Ox BX1120 User Manual

BX1120
1997-2006 Jeep Wrangler
(Includes Rugged Ridge Double Tube Bumper)
Installation Instructions
292-6041 Rev J Page 1 of 5 6/24/14
1. Blue Ox
®
towing products and accessories are
intended to be installed by Blue Ox
®
Dealers
who are familiar with our products and have the
equipment and knowledge necessary to do “t
work”. If needed, Blue Ox
®
Dealers can be found
at www.blueox.com or by contacting our Customer
Care Department at (402) 385-3051.
2. Many Blue Ox
®
baseplates are designed to
use existing holes and hardware to mount the
baseplate to the towed vehicle. Even though bolts
are there, do not assume they are adequate for
baseplate mounting. Always use the hardware
supplied in the hardware kit and existing hardware
as specied in the installation instructions.
Reference your vehicle owner’s
manual for manufacturer’s towing
specications.
Serial Number
If the front of your vehicle looks different than
this, please contact us at (402)385-3051.
!
Failure to read and follow these instructions
could result in separation of the towed vehicle
from the tow bar, causing property damage,
loss of towed vehicle, personal injury or death.
WARNING
Bolt Size Grade 5 Grade 8
1/4” 10 14
5/16” 19 29
3/8” 33 47
7/16” 54 78
1/2” 78 119
5/8” 154 230
3/4” 257 380
Bolt Torque Specications
Torque in Foot-Pounds for Inch Bolts
Bolt Torque Specications
Torque in Foot-Pounds for Metric Bolts
Bolt Size Grade 8.8 Grade 10.9
6MM 6 8
8MM 16 22
10MM 31 40
12MM 54 70
14MM 89 117
16MM 161 230
18MM 222 318
Attachment Tab Height: 17-3/4”
Attachment Tab Width: 24”
Please read BOTH these Installation Instructions and the General Instructions prior to
installing or operating this equipment.

Blue Ox BX1120 Specifications

General

Brand	Blue Ox
Model	BX1120
Category	Automobile Accessories
Language	English

Summary

Installation Notices and Precautions

Handling Cosmetic Parts and Tools

Guidance on handling cosmetic parts, using power drills, and reciprocating saws safely during installation.

Electrical Connections and Baseplate Integrity

Ensuring all electrical connections are functional and baseplate integrity is maintained as per GVWR.

Bolt Tightening and Accident Procedures

Instructions on using Loctite Red, proper bolt tightening, dealer responsibilities, and baseplate replacement after accidents.

Tools Required

Important Installation Information

Customer Service Commitment

General Information and Installer Notice

Product Registration and Owner Responsibilities

Ensuring product registration and owner's responsibility for inspecting towing equipment and hook-up procedures.

Baseplate Installer Responsibilities

Installer's duty to watch for critical vehicle components like lines, wires, hoses, and frame attachment points.

Permanent Baseplate Safety Cable Installation

Recommendations and guidelines for installing permanent baseplate safety cables to prevent towed vehicle separation.