Blue Ox BX1136 User Manual

BX1136
2014-16 Jeep Cherokee Trailhawk
(Includes Adaptive Cruise)
Installation Instructions
405-0396 Rev A Page 1 of 8 11/16/15
Please visit www.blueox.com for the latest version of these installation instructions.
Reference your vehicle owner’s
manual for manufacturer’s towing
specications.
Serial Number
If the front of your vehicle looks different than
this, please contact us at (402)385-3051.
!
Failure to read and follow these instructions
could result in separation of the towed vehicle
from the tow bar, causing property damage,
loss of towed vehicle, personal injury or death.
WARNING
Bolt Size Grade 5 Grade 8
1/4” 10 14
5/16” 19 29
3/8” 33 47
7/16” 54 78
1/2” 78 119
5/8” 154 230
3/4” 257 380
Bolt Torque Specications
Torque in Foot-Pounds for Inch Bolts
Bolt Torque Specications
Torque in Foot-Pounds for Metric Bolts
Bolt Size Grade 8.8 Grade 10.9
6MM 6 8
8MM 16 22
10MM 31 40
12MM 54 70
14MM 89 117
16MM 161 230
18MM 222 318
Attachment Tab Height: 21”
Attachment Tab Width: 37-1/2”
Please read BOTH these Installation Instructions and the General Information sheet prior to
installing or operating this equipment.
1. Blue Ox
®
towing products and accessories are
intended to be installed by Blue Ox
®
Dealers
who are familiar with our products and have the
equipment and knowledge necessary to do “t
work”. If needed, Blue Ox
®
Dealers can be found
at www.blueox.com or by contacting our Technical
Service Department at (402) 385-3051.
2. Many Blue Ox
®
baseplates are designed to
use existing holes and hardware to mount the
baseplate to the towed vehicle. Even though bolts
are there, do not assume they are adequate for
baseplate mounting. Always use the hardware
supplied in the hardware kit and existing hardware
as specied in the installation instructions.

Blue Ox BX1136 Specifications

General

Product Type	Weight Distribution Hitch
Material	Steel
Finish	Powder Coated
Hitch Type	Weight Distribution
Compatibility	Various
Fits	2-inch receivers
Shank Size	2-inch

Summary

Product Specifications and Safety

Attachment Tab Dimensions

Specifies the height and width of the attachment tabs for the baseplate.

Critical Installation Warning

Warns about potential separation and severe consequences if instructions are not followed.

Installation Notes and Notices

Installation Notes

Provides context on fascia removal, drilling, trimming, and vehicle variations.

Fitment and General Notices

Covers fitment dates for models and general notices for safe installation practices.

Required Tools and Important Guidance

Tools Required for Installation

Lists all necessary tools for the baseplate installation process.

Important Installation Advice

Offers crucial advice on using genuine parts, Loctite, and warranty implications.

Fascia Removal Procedures

Fascia Removal Steps 1-4

Details the initial steps for removing the vehicle's fascia and related components.

Tow Hook and Bumper Removal

Tow Hook and Bumper Removal Steps 5-8

Explains the process of removing tow hooks and trimming the bumper for clearance.

Baseplate Attachment to Vehicle

Baseplate Attachment Steps 9-11

Describes how to attach the bumper attachment plates and the baseplate to the vehicle.

Final Assembly and Trim

Safety Cables and Fascia Trim Steps 12-14

Details attaching safety cables and trimming the fascia for proper fitment.

Customer Service and Support

Customer Service Commitment

Outlines Blue Ox's commitment to customer care and technical assistance.

General Information and Safety Cables

General Information

Covers product registration, owner responsibilities, and equipment inspection.

Baseplate Installer Notice

Highlights critical checks for installers regarding wires, hoses, and frame points.

Permanent Baseplate Safety Cable Installation

Recommends and explains the installation of permanent safety cables for towed vehicles.

Product Warranty

One Year Limited Warranty

Details the terms, coverage, limitations, and claims process for the product warranty.