Why doesn't the Boost/Charge LED turn off on my Blue point Automobile Battery Charger?
This is normal. The Boost/Charge LED will not turn off until the battery is disconnected from the charger, because the charger is still in Boost or Charge mode.
What if Blue point EEBC100A Automobile Battery Charger cannot desulfate the battery?
Have it checked or replaced, because the battery could not be desulfated.
General| Input Voltage | 120V AC |
|---|---|
| Output Voltage | 6V/12V |
| Charging Current/Rate | 10A |
| Battery Type | AGM, Gel |
| Protection Features | Reverse Polarity Protection, Short Circuit Protection |
Guidance on understanding hazard signals and safety messages within the manual.
Precautions against electrical hazards and fire risks associated with the charger.
Critical safety advice concerning explosive gases generated by batteries during operation.
Safety precautions for handling battery acid, a highly corrosive sulfuric acid.
Guidelines for safe placement to prevent explosions and acid contact.
Warning about sparks near batteries and the risk of explosion when installed in a vehicle.
Safety warning regarding sparks near batteries and potential explosions when outside the vehicle.
Essential information about grounding and AC power cord safety.
Guidelines and recommendations for using extension cords with the charger.
Description of the main switch for selecting charger modes.
Explanation of the digital display indications for voltage and amperage.
Function of the button used to change the digital display output.
Operation of the button to initiate or halt the charging process.
How to choose between different charging or boosting rates.
Meaning of the different LED lights indicating charger status.
Steps for using the Boost and Maintain/Charge functions.
Instructions for jump-starting a vehicle using the engine start function.
Handling of aborted charges and the desulfation mode for batteries.
Indications of a full charge and the maintain mode operation.
Tips for efficient charging, battery revival, and vehicle operation.
Using tables to estimate charge times based on battery type and rating.
Calculating charge time using battery charge percentage and Amp Hour rating.
List and explanation of error codes displayed by the charger.
Common problems, their possible causes, and solutions.
To Next Page