Blue Tiger SOLARE - Basic Operations

8 | P a g e w w w . b l u e t i g e r u s a . c o m | 8 0 0 - 9 3 5 - 1 1 6 5
BASIC OPERATIONS
Button
Function
Operation Instruction
Multi-Function Button
(MFB)
Power On
Press MFB for 6 seconds to turn on headset. You will hear a prompt tone "Blue Tiger
Activated", and then a prompt tone "Pairing, please wait". Once the headset is connected to
your device successfully, you will hear a prompt tone "Device Connected".
Power Off
Press MFB for 4 seconds to turn off headset. You will hear a prompt tone " Blue Tiger Off".
Redial Last Call
Press Volume + and Volume – for 0.5 seconds
Voice Dialing
To initiate the Bluetooth Device’s Voice Assistant (such as Apple Siri, Google Assistant,
Samsung Bixby, etc.), double press the MFB. Listen for the tone then begin speaking.
Answer a Call
Short press MFB for 1 second to answer a phone call.
Hang Up a Call
Short press MFB for 1 second to end a call.
Answer 2nd Incoming Call
To answer a second incoming call and end the ongoing call, tap or press the MFB for 0.5
seconds.
To answer a second incoming call and place the ongoing call (the first call) on HOLD, double
press the MFB. To end the second call and resume the 1st call on HOLD, tap or press the
MFB for 0.5 seconds
Double tap to switch between the 1st and 2nd call
Reject a Call
Long Press and hold the MFB for 1 second to ignore an incoming call.
Play/Pause
Long press for 1 second
Changing Language
Press the Multi-Function Button (MFB) and Vol+ button simultaneously for 1 second. This
function can only be activated in standby or connected mode. The following languages are
selectable: English, French, German, and Spanish. Each successive button press will cycle to
the next language.
Volume +
Volume Up
Short press
Next Song
Long press for 1 second
Volume -
Volume Down
Short press
Previous Song
Long press for 1 second when at the start of a song. If not at the start of a song, repeat the
process.
Volume + -
Mic Mute
During phone calls, the microphone can be muted by pressing Vol+ and Vol- for 1 second.
User will hear a prompt “Mute On”. A double tone will alert user every 10 seconds that the
microphone is muted. Pressing Vol+ and Vol- for 1 second will deactivate the Microphone
Mute function. User will hear a prompt “Mute Off”.
Turning BT LED light Off
The Blue Tiger LED can be turned off by pressing Vol+ and Vol- simultaneously for 5
seconds. This function can only be activated in standby or connected mode.
Turning BT LED light On
To turn the LED back on, press Vol+ and Vol- simultaneously for 5 seconds.