7
ABOUT YOUR VARIABLE SPEED PUMP
VARIABLE SPEED MOTOR FEATURES:
This variable speed pump is designed to operate your swimming pool filtration
system as well as your spa, waterfall, cleaner, heater, salt chlorine system and other
water applications. Using the control panel, you can run your pump on one of the four
selectable preset speeds or you can adjust the pump to run at alternate speed. The
built in advanced energy conservation features of the Variable Speed pump ensure
that your filter system will operate at peak efficiency.
The Variable speed pump can run at up to eight speeds that can be adjusted to
run at specific time intervals. The Blue Torrent Variable Speed pump out performs all
conventional pumps in its class. The pump can operate at speeds as low as 450 RPM
and as high as 3450 RPM. The pump has four factory preset speeds of 750RPM,
1500 RPM, 2500 RPM and 3100 RPM.
The preset speeds can be selected using the pumps control panel and by
pressing speed 1, speed 2, speed 3 or speed 4. The control panel also has LED
indicators for speed as well as alarm indicators and error messages to warn the user
against under and over voltage, high temperature, over current and freeze protection.
The pump drive assembly of your Variable Speed pump consists of a
control panel and the system electronics that drive the motor. The drive
microprocessor controls the motor by changing the frequency of the current it
receives in addition to changing the voltage to control the rotational speed,
this system enable to pump to deliver unsurpassed energy efficiency.
• Permanent Magnet Synchronous Motor (PMSM)
• High efficiency – 92% at 3450 RPM – 86% at 1000RPM
• Superior speed control
• Low operating temperatures due to energy efficiency
• Totally enclosed and fan cooled
• Extremely quiet operation
• Uses same technology as found in hybrid cars
To Next Page
Loading...