1. Keep the pool clean and maintain proper water chemistry by applying the correct pool chemicals.
Unsanitary water is a serious health hazard.
2. Maintain pool pH level between 7.2 to 7.6.
3. Carefully follow the installation and other instructions in the filtration system manual.
4. Clean the liner regularly with non-abrasive brushes or an approved vacuum system.
5. Run filtration system at least one full day before using the pool. Allow enough time to ensure the
pool water is completely filtered and sanitized before swimming.
6. For 52-in pools, make sure the water level is at least 6-in (15-cm) from the top or halfway up the
skimmer opening before running the filter.
To Next Page
Loading...
