Need help?Do you have a question about the Blue-White FLEX-PRO PROSERIES-M Flex-A-Prene M-3 and is the answer not in the manual?
Lists various Flex-Pro pump models with their specifications and part numbers.
Details technical specifications like pressure, temperature, voltage, dimensions, and materials.
Lists materials used for wetted and non-wetted components of the pump.
Highlights key operational features and benefits of the Flex-Pro pump design.
Lists certifications and compliance standards for the pump.
Guidance on selecting an appropriate location for pump installation.
Provides physical dimensions and mounting hole spacing for M-3 and M-4 models.
Instructions for connecting the pump to electrical power and wiring requirements.
Details terminal connections and input/output signal schematics for pump operation.
Explains the function of buttons and display elements on the pump's control panel.
Describes how to navigate through the pump's menu system using buttons and prompts.
Covers settings for display language, password, display rate, and factory defaults.
Limits the maximum motor RPM to prevent overfeeding.
Allows calibration of the pump's output rate for accurate dispensing.
Sets up various operating modes like Manual Adjust, 4-20mA, 0-10VDC, Frequency, Pulse, Cycle, Dispensing, Dosing.
Enables remote start/stop functionality via external switches or signals.
Monitors fluid output and stops the pump if no fluid is detected.
Detects tube rupture by sensing chemical presence and triggers an alarm.
Manages control between the local touch pad and external remote signals.
Configures an alarm based on the number of pump tube revolutions for maintenance alerts.
Configures 4-20mA or frequency signals for external device communication.
Assigns relay outputs to monitor various pump functions or statuses.
Assigns contact closure outputs for external signaling of pump events.
Guidelines for weekly checks of pump components for signs of wear or chemical attack.
Procedures for cleaning pump parts and lubricating the roller assembly.
Method to reverse rotation direction to extend tube life.
Step-by-step instructions for safely replacing the pump tube assembly.
Catalog of available replacement parts for M-3 and M-4 pump models.
Lists parts and conditions excluded from the pump warranty coverage.
Provides additional details and precautions related to pump warranty and chemical handling.
Outlines the steps for returning a pump for warranty repair or replacement.
General| Brand | Blue-White |
|---|---|
| Model | FLEX-PRO PROSERIES-M Flex-A-Prene M-3 |
| Category | Water Pump |
| Language | English |
To Next Page
