Need help?Do you have a question about the Blue-White FLEXFLO M2 Series and is the answer not in the manual?
Lists available pump models, feed rates, pressure, temperature, and model numbers.
Details materials used for wetted and non-wetted components of the pump.
Lists certifications and standards the pump complies with, including safety symbols.
Provides guidance on selecting a suitable location for pump installation.
Displays a table with the physical dimensions of the M2 pump in inches and centimeters.
Instructions on how to install injection fittings and strainers for different connection models.
Explains power cord options and wiring terminals with I/O schematics for signal connections.
Describes the different operating modes (0-4) and their functions for the pump control pad.
Configures the Tube Failure Detection sensitivity to prevent pump damage from tube rupture.
Sets up the Flow Verification Sensor delay time to detect flow interruptions or tank emptiness.
Configures the 4-20mA signal output for controlling external devices or data logging.
Sets the display unit for the pump's flow rate (e.g., mL/m, Oz/m, L/h, G/h).
Shows how the pump displays flow rate and units of measure during operation.
Illustrates runtime screen displays for motor speed percentage, 4-20mA output, and tube life timer.
Shows runtime screens for motor speed and mA input/output signals in 4-20mA operation mode.
Displays runtime screens for motor speed, pulses received, and mA output in Pulse Batch mode.
Step-by-step instructions for safely removing the pump tube from the head.
Detailed steps on how to correctly install a new pump tube using the provided tool.
Guide for replacing worn motor brushes, including parts and steps.
Details the warranty period, terms, and conditions for the pump.
Lists items and conditions excluded from the pump's warranty coverage.
Outlines the steps for initiating and processing an in-warranty repair request.
Provides warnings and guidance on the safe use and application of Blue-White products.
Advises users on chemical compatibility and potential effects on pump materials.
General| Type | Peristaltic Pump |
|---|---|
| Motor | Brushless DC |
| Tube Material | Santoprene |
| Enclosure | NEMA 4X |
| Power | 12 VDC |
| Temperature Range | 32°F to 140°F |
| Materials | Polypropylene |
| Connection Size | 1/4" or 3/8" |
| Output Signal | 4-20mA |
| Repeatability | ±0.5% |
To Next Page
