What to do if the temperature exceeds 75°C at the control of my Blue-White Water Pump?
If the temperature exceeds 75°C at the control, check the ambient conditions. Once the pump has cooled to ambient temperature, restart it.
Details the different Flex-A-Prene A1A tube pump models available.
Lists materials in contact with pumped fluids, crucial for chemical resistance.
Details materials used for parts not in contact with pumped fluids.
Information on ETL, CE, and NSF certifications and compliance standards.
Guidance on selecting an appropriate and accessible location for pump installation.
Instructions and diagrams for securely mounting the pump to a wall.
Steps for assembling and installing the discharge injection fitting and suction strainer.
Details the 4-Pin M8 connector pinout and specifications for I/O functions.
Describes the pump's operation states based on LED indicators and input signals.
Procedure to test the TFD system's ability to detect specific chemicals.
Guidelines for weekly checks to identify wear, leaks, or chemical damage.
Procedures for cleaning pump components and lubricating the motor shaft and roller assembly.
Identifies the specialized tool included for tube installation and removal.
Step-by-step instructions for safely removing the pump tube assembly.
Detailed guide for correctly installing the new pump tube assembly into the pump head.
Details the warranty period, coverage, and conditions for the pump.
Exclusions from the warranty, including perishable parts and misuse.
Steps to follow for returning the pump for warranty service, including RMA process.
Important safety and liability information regarding product use and suitability.
Cautions about chemical compatibility and potential damage to the pump.
General| Series | A1A |
|---|---|
| Category | Water Pump |
| Manufacturer | Blue-White Industries |
| Repeatability | ±0.5% |
| Enclosure Rating | NEMA 4X |
| Pump Type | Peristaltic |
| Turndown Ratio | 100:1 |
| Type | Peristaltic Pump |
| Maximum Pressure | 100 PSI |
| Accuracy | ±1% |
| Control Options | 4-20 mA, Pulse, Manual |
| Power Supply | 24 VDC |
| Materials | Polypropylene, PVDF |
To Next Page
